Helpful Tips For San Diego Turf Installation
If you are considering artificial turf for your San Diego home, it is important to use the right procedure to install it correctly. It is without doubt that this type of grass can provide a lot of benefits including reduced water usage, improved aesthetics, reduced maintenance costs and durability as well as environmental benefits, but all these will only be possible if the grass is installed properly. You may either choose a professional to do the installation for you or you can go for do-it-yourself installation. You should only go for the latter if you are absolutely aware of the right procedure for installing turf. In order to make sure that your San Diego turf installation is carried out properly, one of the things that you will need to do is to make sure that the surface that will be covered by the turf is clean and smooth. You can do this by applying a self-leveling compound that will get rid of any surface imperfections before laying the artificial grass on top of it. This will be a very good idea in the event that the pile of grass that you are laying happens to be very low.
When applying the turf on the ground, you should allow it to have a space of around 50mm where natural grass can grow on each side of the areas to ensure a perfect edge. You will need to work out the size of the area where you want to install the artificial grass before you go out to purchase it. The grass is usually supplied in different lengths and widths, so you will need to get the measurements of the area correctly to avoid a situation where you will buy turf that is not enough or not more than enough. To give the rolls of the artificial grass the best finish when installing them, it will be a good idea to lay them in the same direction. Another important detail that you should not overlook when installing turf in your San Diego home is to plan your drainage. Make sure that artificial grass that you are installing is permeable to water, and there should also be an additional drainage layer below it. If there is no drain close to the lawn, be sure to install a drainage system before you proceed with the installation. You will also need to install a waterproof border around the perimeter of the area that you will install the turf in the event that one is not already available. This will help you keep the artificial grass from separating over time or slumping.